80/105 Series Land Cruiser Rear Cross Member Replacement Winch Bar
$1,350.00 GST
Our Refab Engineering 80 series rear cross member replacement is designed for the serious off roader.
Full cross member replacement.
6 mm winch plate with standard bolt pattern.
16 mm recovery points left and right machined finish soft shackle compatible.
Integrated hitch receiver.
once order is placed this is non refundable
5 in stock
This bar comes as a laser cut and folded flat pack kit. It is set-up to be a DIY project.
All bars will be supplied with a compliance plate. Note, the compliance plate must match the tow capacity of your vehicle.
The BTC options are as follows:
80 Series < 1996 = 2,500 kg
80 Series >=1996 = 3,500 kg
105 Series = 3,500 kg
As you are checking out, there is a comments box, please advise your vehicle and tow capacity so that the correct plate can be sent with your kit.
At your option, Refab Engineering Workshop fits these in house. Please contact sales at Refab engineering if you would like to go with this option.
The bar is compliant with ADR 62/02 when fitted as per the blog/guide instructions and a qualified welder, welding to AS 1554.1 GP conducts the work. Please note, you may have to contact your local automotive engineer to seek approval depending on your jurisdiction.
Related products
