Land Cruiser 40 Series To 80 Series Chassis Body Mounts (1960 – 1978)

Parts you will Need.

  • Read Full Guide Before Fitting.
  • Refer to your Engineer Of choose for weld produces and use of product in your country or state.
  • Once chassis is fully Striped and cleaned ( Read chassis preparation Guide)
  • Drill spot welds of factory body mount cups on 80 chassis. ( use the 4 middle small cups)
  • 4 x Body mount cups and rubbers, bolts and crush tubes to suit.
  • weld through primer and good F clamps.
Cab mount

How to Work out your year of Cab : 1960-1978.  Floor reference photo

Front Body Mounts
Rear Body Mounts
Front Bolt Bracket
Front Bolt Bracket 1
Bolt Mod Snip

Step 1 !

Mount 4

STEP 2 !

Rear Part of the Chassis
Wheel Placement

Step 3 !

Body Mount 2

Step 4 !

Lowwer
Cups

Step 5 ! Once these steps are done bolt body down to front mounts.

Rear Body Mount Modification

Use the body as a jig to set the rear mounts in position use a hi lift jack to hold the body while you tack in place.

Rear Body Mount

Step 6! Body Mounts Fitted.

Important Information !!

make sure your sill is even with your chassis. you want to adjust body rubbers to suit if fitting REFAB sliders and guards its important to set final body position when you get to that stage.

make sure you read The Flipped cross member guide to mount front of body.

( grill bonnet etc)

Body Level

Final Summary !

Please study the shop photos and description also check out gallery for reference . If you find any mistakes or easier ways please email [email protected]

Happy building legends!!!

Now Crack a cold one and sit back and admire your 40 mounted to a 80 chassis!!

Chassis 4